Direct View LED DisplaySupport

Do dvLED displays have power protection during on/off?

Answer: Generally speaking, low-end LED displays do not have a power protection mechanism and are more susceptible to damage. Users should avoid repeatedly turning on/off the power to avoid damaging the display for all models.

Where is the back hole location for where the system control power cable can pass through on DVLED Displays?

Refer to the schematic below for dimensions and approximate location of the power cable back hole. Note: HDMI/USB back hole configurations are displayed here, however, your current firmware may not support the HDMI back hole configuration.

How does the signal get transmitted across components on a DVLED Display?

Solution The signal will be sent from the “Main Board” and transmitted in three ways: 1) The first path is from the “Audio Board” to the “Speaker” 2) The second path is to the “RS232 Module” 3) The third path is from the “Transfer Board” to the “Receiving Board,” and from the “Receiving Board” to the “LED Module.” ...

What are the DVLED installation conditions of the environment?

Product installation conditions: 1. Installed in a well-ventilated area, indoors. 2. Ideal ambient room temperature at 22℃±10℃, with an ideal relative humidity of 25% to 75% without condensation. 3. Installation location is more than three meters away from air conditioning. 4. Installation location is away from heat sources (e.g. radiators...

What questions do I need to consider before installing my DVLED Display?

To ensure a seamless installation, a comprehensive assessment of the mounting location, structural integrity, power supply, and site logistics is mandatory. Steps and Checklist: Installation Environment Define the exact mounting location and ensure there is ample room for equipment (e.g., tools, ladders, scaffolding). Power and C...

What should I do when I receive my Flight Case(s) for my DVLED product(s)?

Solution Step 1: Insect the flight case and compare to pre-shipment photos; document any damage to the flight case on the BOL (bill of lading). Step 2: Open the flight case and compare to pre-shipment photos; document any damage to the flight case on the BOL. If you have multiple Flight Cases per dvLED product, you may refer to "Why...

What do I do if there's damage on the DVLED flight case that I received?

Answer: If you are the recipient of the DVLED flight case, you must document any damage to the fight case onto the BOL (bill of lading). For information on potentially damaged or missing contents inside the flight case, please refer to "I'm a DVLED installer, but I need to ensure shipment corresponds with what is supposed to be provided. What a...

What is the installation process of the DVLED Display?

The DVLED installation process has multiple steps and the guidelines are given to those who wish to receive training. Installation should be done by personnel who have received training. Please refer to the installation video for a brief installation demonstration. Please contact your regional office for DVLED training-related questions. ...

What are the Flight Case dimensions and weight for my dvLED Display?

Flight case dimensions and weight will vary by model. Please refer to the table below for Flight Case dimensions and weight by dvLED product: LD108-121 LD135-151 LD163-181 LD216-251 Dimensions (W x D x H) 58” x 27” x 34” (1470 x 850 x 680 mm) 71” x 30” x 34” (1800 x 850 x 745 mm) 83” x 32” x 34” (2100 x 850 x ...

How do I know which way is correct when mounting LED modules on a DVLED Display?

Answer: The correct orientation when installing the LED module is with the arrow (towards the center of the module's PCB side) facing up.