1. S/PDIF: When connected via COAX OUT or OPTICAL port to an external amplifier, the output signal level is fixed. With this connection, both built-in and external speakers will output audio. You need to adjust volume on IFP speaker via IFP volume control button or remote control and adjust volume on external speaker by...
There are some suggestions: 1.If IFP is under Sleep mode, please re-plug HDMI cable. 2.If IFP is on, turn windows to Hibernation (S4) mode, then IFP to Sleep mode. Wake up notebook then IFP will be awaken.
Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. A USB update is used when OTA (over the air) update is not a viable option or a complete re-flash of the firmware is required. Firmware files can be loc...
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer either method below: 1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key. Then power button can ...
1. Enter the Android Settings menu (use the settings button on the unit or press Menu on the remote); if you use the setting button on the unit you will need to click the icon below: 2. Then select Other Settings. 3. Select On or Off.
Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP70. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP70. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP70. On IFP 50, 50 Gen 1, 50-2, 50 - Gen 2 , 50-2EP and 70 models, you can press remote control S.MODE button. On 50-3, 50- Gen 3 an...
According to USB 2.0 SPEC, the maximum USB cable length is 5 meters and that’s why we provide one 5 meters USB cable along with IFP display. If you need a USB cable longer than 5 meters, please use self-powered USB hubs or active (repeater) cables.
No, CDE7061T VGA Out only bypass the signal from VGA in 1 and VGA in 2, the annotation won’t be shown on second display.
Yes, the HDMI out on the IFP7550 will show the annotations on the second display.
You can disable the “Touch and Annotate from Mobile” function in setting.