How to make sound output from external speaker bypass integrated speaker in IFP30/50 series?

Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.

How to avoid unauthorized cast-in via Airplay?

To disable Airplay Service in vCast do the following：   Open vCastReceiver on the IFP Select Settings (Gear icon) Select iOS Advance Settings Uncheck Airplay Service   To enable Airplay follow steps 1-3 and check Airplay Service

What to do when the touch function gets no response from all input sources on my IFP5550, IFP6550, IFP7550, IFP8650?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3,  IFP70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP70   Please press the following front panel button combination in sequence to unlock the touch function.   “VOL+”, “VOL+”, “VOL+”, “SETT...

How do I wake up my IFP50 series in standby mode?

IFP50 has a feature of “Wake on active source” to wake up from standby mode when there is an external HDMI/VGA signal input.   Supported input sources:   1.IFP50-1/Gen 1 and 50-2/Gen 2/50-2 EP: HDMI and VGA 2.IFP50-3/Gen 3: HDMI.

How do I disable the Embedded Player in IFP7550/IFP5550/IFP6550/IFP8650?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**70   Please follow below instructions to disable the Embedded Player.   Press INPUT 9 9 1 in sequence on the remote to enter the Debug M...

What are the ViewBoard Network Requirements?

Please refer to the attached PDF. URL:https://support.viewsonic.com/helpdesk/attachments/33046905099

How can I adjust color temperature on IFP?

Applied model 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP**70 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP**30, IFP**70 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP**30, IFP**70     Due to Android limitation, color temperature is only adjustable in other source(HDMI/PC, etc), not in Embd player...

How can I remotely control IFP to power on and off(standby)?

You can remotely control IFP with RS232 cable or Lan cable by ViewSonic vController.   <Note> To power on via Lan may work by model wise and needs to set IFP standby mode to sleep. Please check specification and UG if it supports.

How to do when the message on my IFP5550/IFP6550/IFP7550/IFP8650, "The device has been locked, please use the U disk to unlock"?

1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3.  2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. Please refer below steps to unlock: 1. Prepare a FAT32 formatted USB drive. 2. Unzip Unlock.zip attached and copy to the USB drive root directory. 3. Insert the USB to I...

How to activate the preinstalled Windows 10 trial in VPC10/VPC14?

1. Purchase the product key online or via Microsoft distributor. 2. Once you have the key, click “Start > Settings > Update & security > Activation > Change the product key”, then enter the new product key then click Next to Activate.