To use EMP-022 with PF0730-I0WW, please follow below instructions to update firmware for EMP-022. 1. Please install the latest Pen Manager Driver for Windows first 2. Please click"Firmware download for using EMP-022 digitizer pen (Windows)" download FW file "WoodpadFWUpdate_V0111.zip". 3. Click to open "WoodpadFWUpdate_V0111.zip...
Please follow below instructions to update firmware for EMP-022. 1. Please install the latest Pen Manager Driver for MacOS first. (1) Uninstall existing Pen Manager Driver for macOS (2) Reboot (3) Install latest Pen Manager Driver for macOS (4) Reboot (5) Open “Security & Privacy” > “Accessibility” > enable “DigitizerDriver”(If It’s alread...
Please follow below instructions to install ViewSonic Pen Manager for macOS. 1. Uninstall existing Pen Manager Driver for macOS 2. Reboot 3. Install latest Pen Manager Driver for macOS 4. Reboot 5. Open “Security & Privacy” > “Accessibility” > enable “DigitizerDriver”(If It’s already enabled, please disable & enable it again) 6. Open “S...
Please follow the steps below to replace the nib of ACP501. 1. Unscrew it in a counter-clockwise direction. 2. Place the tip upright facing upwards. 3. Remove the old nib then insert the new nib into the barrel of the pen. 4. Screw the tip back in a clockwise direction to secure.
It is possible that your iPad is paired with another stylus (Apple Pencil or other stylus). Please go to settings and disconnect by tapping "Forget this Device" on your iPad. Your ViewStylus does not need pairing, but make sure that you select the correct mode (green light for iPads, blue light for other touch-screen devices).
A full charge takes about 1.5 hours from 0% and will last for up to 11.5 hours of constant use. *Note* A 10-minute charge is about to support around 1 hour of use.
1. When in use： Green light: iPad mode Blue light: Capacitive device mode 2. When Charging： Constant red light: Charging Flashing green light: Low power *The light will be off when the stylus is in charging
Please tap on the back of pen with your finger to switch the pen from iPad mode (green light) to Capacitive mode (blue light).
Yes, ViewStylus ACP501 is compatible with ID2456. However, you need to download firmware before you use. Please download firmware by clicking the “ID2456 firmware update for ACP501” link. For more details about ACP501, please visit https://www.viewsonic.com/global/products/pendisplay/ACP501.
No, the surface of the WoodPad™ series are specially treated to prevent moisture and water splash.