How to solve the problem with my monitor as it turns off automatically?

If the monitor turns on briefly, then turns off, check the following: Make sure the power cable is securely connected. Turn off the monitor, unplug the power cable for 15 seconds and plug the power cable back then turn on. Check the video cable and make sure it is connected on both ends securely.           Reset the factory default ...

How to manually install LED monitor drivers under Win10 64-bits?

If you're not able to install your monitor drivers with the driver pack "Standard Monitor Driver Signed Windows 10 x64 " downloaded from ViewSonic website, please follow below instruction to manually install Win10 x64 driver. 1. Download the attached ZIP file including monitor drivers to your PC and extract it. 2. Under "Control Panel",...

How to setup dual monitors on a computer?

Dual monitor setup is simple to configure on modern computers. Windows will automatically detect and configure the displays. Requirement:   1. Windows 7 or later. 2. A PC or laptop with at least 2 video out ports.  3. 2 monitors.   After connected 2 monitors to 2 video out ports, Windows will automatically load the drivers and present a...

Why does image persistence occur with my LCD monitor?

Image persistence (or image retention) is a result of a stationary image being displayed for a long period of time.    <Correction>   Turn off the screen for hours.   <Prevention>   1. Set the display to turn off after a few minutes of system idle under ”Power & Sleep “ (Win10) or “Battery” (Macbook).      2. Turn off the monitor when ...

Why is there high pitched noise from my monitor?

In normal operating conditions, there might be normal electric current sound came monitor which should not impact on your usage.   If this did not occur in the past but appeared recently, please contact ViewSonic service center.

Should I install Windows 10 drivers for my monitor?

ViewSonic plug and play monitors do not require a proprietary Windows 10 driver to be installed.   Instead, Windows 10 will automatically read the EDID information stored in the monitor and install Generic PNP Monitor drivers to enable its full resolution capabilities.   The only difference is you will see monitor model name in Device Manag...

How to clean LCD display?

General Precautions Make sure the monitor is turned off and the power cable is unplugged from the power outlet. Never spray or pour any liquid directly onto the screen or case. Doing so could damage your monitor. Dust or hard materials may scratch the screen. Please make sure the cleaning cloth is free of any debris. Clean and dry the m...

How to change refresh rate in windows 10?

Please refer to the video on how to change: https://www.youtube.com/watch?v=sAkbjPiLNcE

What to do if there is shadow or double image on screen?

This can be caused by a long cable or docking stations.   Longer cables may be prone to ghosting, lines, double images, or poor focus.  The improper shielding of the cables can cause a shadowing or ghosting effect also.    We recommend to check the video cable and, if possible, use HDMI Premium certificate cable for long distance connectio...

Is there Linux drivers for my monitor?

No, as Linux system should automatically identify and recognize the monitor.

Contact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.