Why Auto Pivot function on VP2468/VP2768 suddenly didn't work with my iMac after upgrading MacOS to v10.12 Sierra?

To make auto pivot work, the communication between OS and monitor is necessary. In Mac OS X or prior version, such communication is done by HDMI signal. However, in Mac OS Sierra and later, Apple changed the behavior in which this is no longer communicated with HDMI signal.   Thus, it's necessary to connect both VP2468/VP2768 and iMac by a ...

Why didn’t the OSD menu auto rotate to match the monitor’s orientation?

The monitor’s OSD pivot function is only effective for the OSD window itself. Additionally, the vDisplay Manager software will be required for the operating system to automatically adjust the monitor’s orientation.

How do I enable 4K resolution with a 60Hz refresh rate via USB Type-C?

To enable 4K at 60Hz over USB, go into the OSD Setup Menu -> Select ‘"SB 3.1" -> Select "Turn Off".   * Using USB Type-C to display 4K resolution at a refresh rate of 60Hz requires you to turn off USB 3.1. ** Current only the following VP monitors support 4K at 60Hz via USB Type-C: - VP2785-4K  - VP3881

Minor image retention may occur when a static image is displayed on the screen for extended periods of time.

This is a normal occurrence for In-Plane Switching (IPS) monitor panels. The longer an image is left static on the screen, the more noticeable image retention will be.  In order to prevent image retention, enable the screen saver function on your monitor so that images are not static on your screen for extended periods of time.

How to check the monitor’s current firmware version?

There are 2 ways:   1.On Monitor, please navigate to OSD -> Setup Menu -> Information, where you will see your current firmware version.   **For VP2468 versions M001 and M002, this function is not supported. If the firmware version is not present in the Information page, please update to version M010 or later.     2. On PC/Laptop, you ...

How to update my monitor’s firmware?

Applied to VP2458, VP2771, VP2785-4K, VP2468, VP2768, VP2768-4K, VP3268-4K VP3481, VP3881, VP2468a, VP2768a, VP3481a To update the firmware, please install vDisplay Manager on your computer and do the following:  1. Click on the Advanced sub-menu, then Information. 2. Connect the USB cable between your computer and monitor. ...

Why is my monitor not detected by the Firmware Update Tool?

Please make sure to use “FW_Update_Tool_v1.08”. Please follow the step by step instructions below to resolve the problem. When the program is initialized, the error message shown below will appear. A Windows error message might also pop up few seconds later. Please close the program and the error messages, then follow the in...