Ugrás a fő tartalomra

What to do if "No Signal" appears on the ViewBoard while connecting an external device (HDMI, USB-C, or PC)?

Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...

How can I lock the menu and input function on IFP5550/IFP 6550/IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP.   Please refer either method below:   1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then the menu and inpu...

What are the ViewBoard Network Requirements?

Please refer to the attached PDF. URL:https://support.viewsonic.com/helpdesk/attachments/33046905099

The Fluo Yellow colour that shows on IFP5550 is becoming a yellow greenish, how can I do?

You can set color temperature to Cold or drag the dot to right to adjust in Display setting. Please note when you set color temperature to Cold or drag the dot to right to adjust, the blue light also increase.

What to do when the touch function has no response on the ViewBoard?

If touch fails across all input sources, you can perform a system initialization using the [INIT TV] command in the Debug Menu. Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Execute Initialization: Locate and select [INIT TV] from the pop-up menu. System Restart: The dev...

How can I update preloaded apps on IFP?

When there is newer version, below Apps will be updated after connected IFP to internet.   AirPlay Whiteboard for Android vCastReceiver myViewBoard Manager myViewBoard Live myViewBoard Display

What's the difference in audio output when connected to S/PDIF OUT(COAX OUT/OPTICAL) and AUDIO OUT on IFP?

1. S/PDIF:       When connected via COAX OUT or OPTICAL port to an external amplifier, the output signal level is fixed.    With this connection, both built-in and external speakers will output audio.        You need to adjust volume on IFP speaker via IFP volume control button or remote control and adjust volume on external speaker by...

How can I reset IFP5550/IFP6550/IFP7550/IFP8650 screen lock password?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3, IFP70. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3, IFP70. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP, IFP70. You can press remote control buttons : INPUT 0 2 1 4 quickly in sequence to restore the password to default.

How do I configure on IFP and use player to power IFP on and off by HDMI CEC?

1.Please turn on player’s HDMI CEC function.  2.Connect IFP and player in HDMI cable.  3.Please enable HDMI CEC function under “Setting > Display > HDMI CEC” on IFP.  When enabled, HDMI CEC allows devices connected to the ViewBoard via HDMI to turn on automatically when the ViewBoard is  turned on. <Note> Not all HDMI ports on IFP suppo...

Is there any recommended slot-in PC which can support vPro and TPM?

VPC14-WP-x and VPC12-WP-x can support both Intel® vPro and TPM 2.0.

ViewBoard Támogatás

General Questions Interactive Display Technical Documents

Általános kérdésekKapcsolatfelvétel

Kérjük, forduljon közvetlenül hozzánk, ha nem talál válaszokat és megoldásokat a ViewSonic termékeivel kapcsolatban.