How to enable AMD FreeSync?

LED monitors produced after 2020 have FreeSync enabled by default. For LED monitors manufactured before 2020, please refer to the following instructions to enable FreeSync. To use AMD Freesync, there're some requirement with graphics cards, graphics drivers and certified monitors. 1. A compatible GPU with a DisplayPort connection. ...

Why sharpness setting in OSD menu is grey out on my XG2702 and VA2719-2K-SMHD?

When resolution is set in native resolution (1:1), both Sharpness and Overscan option in OSD will be grey out.

Is XG2401/XG2402/XG2701/XG3202-C compatible with the resolution 1920x1080@144Hz connected in HDMI?

  ViewSonic XG2401/XG2402/XG2701/XG3202-C can support the resolution 1920x1080@144Hz in HDMI.   However, to enable 1920x1080@144Hz, there'll be some requirements except for the monitor.   1. Graphics card/Laptop: Must support HDMI 1.4 output with 340MHz pixel clock or HDMI 2.0 output capability.   2. HDMI cable: It's suggested to connect...

Is VG2448 compatible with Auto Pivot function?

VG2448 doesn’t support Auto Pivot Function but integrated with below features instead. 1. VG2448 supports +/- 90 degree pivot, and users need to do manual adjust for screen rotate or OSD rotation. 2. There's "OSD pivot" option in OSD menu l   VG OSD tree

How to output video at 120 Hz from PS5 or Xbox Series X/S to ViewSonic monitors.

PlayStation 5 and Xbox Series X/S consoles support video output up to 120 Hz. Follow the instructions below to configure 120 Hz output. <PlayStation 5> 1. Open "Settings". 2. Select "Screen and Video". 3. Select "Enable 120 Hz Output" under "Video Output". 4. Select "Automatic" in the pop-up menu. 5. Return...

What is "Low Input Lag" and which one should I choose?

Input lag means the time difference between when user controls PC and sees the response on monitor.      There is a trade-off to picture/video performance. If no particular demand, it is suggested to set it to off.

How to manually install LED monitor drivers under Win10 64-bits?

If you're not able to install your monitor drivers with the driver pack "Standard Monitor Driver Signed Windows 10 x64 " downloaded from ViewSonic website, please follow below instruction to manually install Win10 x64 driver. 1. Download the attached ZIP file including monitor drivers to your PC and extract it. 2. Under "Control Panel",...

What is USB speed and refresh rate of VG2756-4K under USB-C connection?

The VG2756-4K (via USB-C) by default can display 4K 60Hz, and the OSD setting for "USB 3.2" is Off.  If the user turns "USB 3.2" On, then a USB-C connection can only display 4K 30Hz. There's not enough bandwidth for USB 3.2 speeds when connected via USB-C to output 4K 60Hz.   This situation will only happen on a USB-C connection. If u...

How to check graphics card drivers in Windows?

1.Under "Control Panel", open "Device Manager". 2. Find the Display adapters and double click on it then double click on the device shown: 3.Select Driver tab, this will list the Driver version.

What to do when there is no display on my monitor?

Check the power LED first. If the LED is on but there's no image, the issue is likely related to the input signal or cable connection rather than power. Troubleshooting Steps: 1. Check the Power LED Status LED is OFF: Ensure the power cable is firmly seated and the physical power switch (if available) is turned on. Try a different wall out...