Skip to main content

What's the difference in audio output when connected to S/PDIF OUT(COAX OUT/OPTICAL) and AUDIO OUT on IFP?

1. S/PDIF:       When connected via COAX OUT or OPTICAL port to an external amplifier, the output signal level is fixed.    With this connection, both built-in and external speakers will output audio.        You need to adjust volume on IFP speaker via IFP volume control button or remote control and adjust volume on external speaker by...

Where can I get more info for suitable slot-in PC with IFP7550?

Please visit product page of IFP7550 in our website and check the section of "RELATED ACCESSORIES" list for details.

How do I disable the Android OS in IFP?

Please follow below instructions to disable the Embedded Player(Android OS).   Steps: Enter Debug Menu: Using the table below, and press the corresponding buttons based on your model. Go to “Player Settings"-> "Embd Player" and turn it to OFF by using the direction button on remote control, choose OK button when prompt confirm messag...

What default app can be displayed in the ViewBoard vLauncher?

Below apps will be displayed in the ViewBoard vLauncher with firmware date after Jan/2021.    

How to activate the preinstalled Windows 10 trial in VPC10/VPC14?

1. Purchase the product key online or via Microsoft distributor. 2. Once you have the key, click “Start > Settings > Update & security > Activation > Change the product key”, then enter the new product key then click Next to Activate.

How do I configure on IFP and use player to power IFP on and off by HDMI CEC?

1.Please turn on player’s HDMI CEC function.  2.Connect IFP and player in HDMI cable.  3.Please enable HDMI CEC function under “Setting > Display > HDMI CEC” on IFP.  When enabled, HDMI CEC allows devices connected to the ViewBoard via HDMI to turn on automatically when the ViewBoard is  turned on. <Note> Not all HDMI ports on IFP suppo...

How can I setup touch on extended display?

Please refer to this video.

Why can't I adjust the Hue and Sharpness settings on the slot-in PC and HDMI source?

The Hue and Sharpness settings are only adjustable for the Analog source such as AV in /VGA source.

How do I wake up my IFP50 series in standby mode?

IFP50 has a feature of “Wake on active source” to wake up from standby mode when there is an external HDMI/VGA signal input.   Supported input sources:   1.IFP50-1/Gen 1 and 50-2/Gen 2/50-2 EP: HDMI and VGA 2.IFP50-3/Gen 3: HDMI.

How can I lock the power function on IFP5550/IFP6550/IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3. 2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP.   Please refer either method below:   1.You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then power button can ...

ViewBoard Support

General InquiriesContact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.