How to update CDE5510/6510 Firmware?

1. Copy the firmware image file to a USB storage device's root directory.

 

NOTE: the USB storage device must be formatted with FAT32.

 

2. Turn off the display via the power switch.

 

 

3. Plug the USB storage device into CDE5510/CDE6510's USB port.

 

 

4. Turn on the display via the power switch.

 

 

5. Once turned on, you will see the LED lights flash red and green.

 

 

6. After the firmware update is complete, the device will reboot.

 

 

 

7. Once rebooted, you will see the "Welcome page".

 

 

Last modified: Apr 2022

Contact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.